ExpressVPN Connection Sharing

Murus
Post Reply
AngloApulian
Posts: 2
Joined: Wed Sep 19, 2018 3:11 pm

ExpressVPN Connection Sharing

Post by AngloApulian » Wed Sep 19, 2018 3:33 pm

Hi all,

I’m setting up Murus Pro and managed to get the ExpressVPN application to connect, however I also wanted to share my ExpressVPN connection with other clients on my LAN. When I look at the Network Interfaces in Murus, it shows my ExpressVPN connection to be utun2. When I then go to Static NAT to set up Share my VPN connection, in the VPN interface drop-down menu there is no utun2 listed, only utun0 and utun1.

I’d be grateful if anyone could please let me know where I’m going wrong and hopefully guide me in the correct way of doing this.

hany
Posts: 484
Joined: Wed Dec 10, 2014 5:20 pm

Re: ExpressVPN Connection Sharing

Post by hany » Mon Oct 01, 2018 2:06 pm

There's a chance that you run the VPN client with Murus already running and Murus interfaces dropdown menu does not refresh its interfaces list. So just quit Murus and restart it, the interface should be correctly listed. Please note that quitting and relaunching Murus does not affect in any way your runtime firewall.

AngloApulian
Posts: 2
Joined: Wed Sep 19, 2018 3:11 pm

Re: ExpressVPN Connection Sharing

Post by AngloApulian » Mon Oct 01, 2018 6:39 pm

Thanks. It’s all up and running now.

Post Reply